90% alumina, low cement castable based on sintered alumina

Maximum Temperature Rating 18000C

MORAL HICAST 90T exhibits superior physical properties to conventional ultra-high alumina castables, including low porosity and excellent thermal shock and abrasion resistance.

Thermal Ceramics Australia produces a complete range of low cement castables up to 90% alumina content. These products, incorporating very closely controlled grain sizing and special additives, give excellent strength, high hot load capability and low porosity. They also show very good chemical attack and thermal shock resistance.

Strict adherence to quality control measures has enabled each Thermal Ceramics Australia location to gain AS3902/IS09002 quality standard accreditation. All products are manufactured according to these tight standards, ensuring consistent high quality.

TYPICAL PHYSICAL PROPERTIES

Bulk Density (kg/m3)	Mean	Std.Dev
@ 110*C	3060	55
@ 1000*C	3060	30
Cold Compressive Strength (Wa)
@ 110*C	85	26
@ 1000*C	130	10
Modulus of Rupture (MPa)
@ 110*C	17	4
@ 1000*C	25	5

Permanent Linear Change (%)
24 Hrs @ 110*C	-0.2 to 0.0
5 Hrs @ 1000*C	-0.2 to 0.0
Maximum Grain Size (mm)	5

TYPICAL CHEMICAL ANALYSIS*

A1203	92%
SiO2	6.8%
Fe203	Tr%
Cao	1.4%
TiO2	Tr%
MgO	Tr%
Alkalies	0.1%

Chemical analysis values are rounded off. Total may not be equal to 100%

APPLICATION DATA

Casting

Nett Quantity of dry material required for placement (kg/m3)	3050
Water Required for Mixing (% by weight)	4.1-5.1

MATERIAL PACKAGING

MORAL HICAST 90T is packaged in multi-ply paper sacks, 25 kilograms per sack.

Nominal shelf life for MORAL HICAST 90T is 36 months when correctly stored.

TYPICAL APPLICATIONS