MORMAG RAM Fe boasts exceptional purity and volume stability with extremely high refractoriness to >2000*C. Alter initial firing, the product operates with a thick, dense sintered hot face layer, the unsintered layer behind the hot face being designed to eliminate crack formation.

Thermal Ceramics Australia offers a range of basic monolithics made from high purity raw materials for many applications in the ferrous and nonferrous industries. This includes high magnesia, magnesia-chrome and spinel products for use in casting, gunning, ramming, dry vibratable and mortar specifications.

Strict adherence to quality control measures has enabled each Thermal Ceramics Australia location to gain AS3902/IS09002 quality standard accreditation. All products are manufactured according to these tight standards, ensuring consistent high quality.

TYPICAL PHYSICAL PROPERTIES

The formulation and installation techniques used for this product do not permit the formation of test specimens.

INSTALLATION PROCEDURE

Refer to Installation Procedure IP/004

HEAT-UP SCHEDULE

Refer to Heat-up Schedule HS/005

TYPICAL CHEMICAL ANALYSIS*

MgO	98%
Cr203	---%
A1203	0.1%
SiO2	0.9%
Fe203	0.1%
CaO	0.9%

*Chemical analysis values are rounded off. Total may not be equal to 100%

APPLICATION DATA

Ramming/Vibration

Nett Quantity of dry material
required for placement (kg/m3)          2840

MATERIAL PACKAGING

MORMAG RAM Fe is packaged in steel drums, 25kg per drum..

Typical shelf life for MORMAG RAM Fe is 6 months.

TYPICAL APPLICATIONS

Designed Primarily as a Hot Face Lining for Coreless Induction Furnaces melting Ferrous Alloys.

BACK

TABLE OF CONTENTS

Combustion & Chemical Engineering.
Copyright © 1998 [CCE]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks
or registered trademarks of their respective companies or mark
holders.